Stuffing it

I used up the last of my workable cement mix yesterday and only covered a little more than half of one short wall. By my estimates in order to daub the entire cabin this way would require an additional 800 lbs of dry cement mix. Not very encouraging.

On the interior I have been experimenting with canned spray foam insulation. I bought three cans and sealed up part of two walls with it. I know this is terribly unauthentic material but something tells me if Daniel Boone could have gotten his hands on this stuff he would have been on it like flies on honey. The color is not great and the bead can be very uneven.

I put some of this on Thursday evening and trimmed it up Yesterday morning. Once it has been trimmed and or sanded it will take stain. 

I did a quick test with some stain to see what it would look like and I have to say for reasons of time and economy this will probably be the way I go to finish sealing the cabin. At least temporarily for the winter. I may still panel the interior with barn wood eventually and I may still mud the exterior someday but for now I'm going to concentrate on sealing up the interior with this stuff.

Ridge cap, daubing and paneling

First project this weekend was to put a ridge cap on the seam of the roof. $20.00 investment but should prevent water from damaging the ridgepole.

Next up was a test of the cement mix and unfortunately moisture has contaminated it over the years. It was more like gravel than cement mix. I pulverized it with a hammer and mixed it up just the same but it doesn't have the right consistency anymore and doesn't appear to be drying well. Also, a quarter of the mix only filled the gaps between six courses of logs on one short side of the cabin. Another solution may be necessary to seal up the cabin.

Knowing that the hardest part of daubing would be the gables I returned to the rafters of the garage and found some old floor boards that had been squirreled away years ago. I trimmed them up and used them to panel the interior gables. This will at least reduce the amount of daubing needed to seal up the gables.

Despite the disappointment of the cement mix the cabin is in practical terms, very close to finished! Most of what I have left to do is cosmetic. I may decide to panel the interior walls if I can find enough old barn wood or other satisfactory paneling to do it.

Chinking

I spent the better part of Saturday and Sunday wedging sticks into the gaps between courses of logs. For the really large gaps I split small Sassafras logs into quarters. Sassafras is very soft wood, splits nicely and smells like root beer!

As you can see I also got the door and shutters for the window hung. Nice bug and rot resistant Ceder left in the rafters of the garage. I used some old cupboard hinges to hang them. After getting the wood chinking, door and shutters finished I decided it was finally time to check out the bags of cement that have been living under the workbench for the last eight years. I had been putting it off because I didn't really want to know if it was unusable.

Turns out the cement wasn't the only thing living under the workbench! A nice healthy Black Rat Snake had taken up residence in one of the open bags of cement. Looks like some mice had been living in it before him. I chased him off with a broom stick and low and behold the cement is still workable. There are three part bags and one unopened bag, all together probably 200 lbs of dry cement mix. Next weekend I'll start sealing up the chinking.

Today I raised my colors to celebrate the beautiful weather and the fact that the snake didn't bite me. Happy  Labor Day!